Затяжной рычаг Parduc® P40

Original tightening clamp for Parduc® P40 Skate Sharpening Machine

If the tightening clamp is worn out and no longer reliably holds the skate in place, replace the clamp immediately.

You can extend the life of the tightening clamp by applying only the necessary tightening force (avoid overtightening) and by regularly lubricating the joints with PTFE dry lubricant. Do not use grease, or any other lubricant that remains liquid.

Please note that the P40 and M25 tightening clamps are not compatible with each other.